Details
Solution 16i
Featuring:
• Easy to read code pad
• Easy fixed text & icon control
• ON & PART arming modes
• Partitioning to multiple areas eg. upstairs, downstairs, garage, granny flat, garden shed, • System indicators – AC fail & system troubles
• Chime feature on user selectable zones
• Remote arming via the telephone
• Walk test mode
• Alarm memory recall
• Code pad panic and duress
• 2 entry timers
![]()
The RF940E is a high performance PIR motion sensor that uses advanced signal processing to provide outstanding catch performance and unsurpassed false alarm immunity. The RF940E’s pet immunity tolerates pets and animals such as a dog up to 13 kg, two cats, or numerous rodents. The detector contains an integral RF transmitter capable of transmitting up to 300 m in open air
Mounting Considerations
Surface or corner mount (with or without the optional
bracket) at a height between 2.3 m and 2.7 m high.
• The maximum wireless range of the detector, in openair, is approximately 300 m. In normal household orcommercial applications, keep the detector within100 m of the assigned control panel receiver.
• Temporarily mount the detector using double-sided tape, and test it for both detector coverage and RFrange from the desired location before mounting it permanently.
• Mount the detector where an intruder will most likely cross through the coverage pattern.
• Do not mount in areas with large metallic surfaces such as heating ducts or electrical wiring which may inhibit the sensor’s RF signals from reaching the control panel receiver.
• Do not mount the detector outdoors or where direct sunlight can reach it.
• In pet immune applications, do not mount where pets can climb because the upper areas are not immune to pets.
Note: Optional mounting brackets can reduce the range and increase dead zone areas. Do not use brackets in pet immune applications.
Battery Recommendations
The following battery types are recommended for correct operation of your detector: Duracell® DL123A, Energizer® EL123AP, or Panasonic® CR123A.
The ICON LCD Code Pad combines Bosch industry leading ICON interface technology with the added benefits of a text display. Installers are provided key information whilst
programming such as memory location and existing data in easy to read text.
Colour coded, illuminated keys allow for easy identification and operation in all ambient light conditions and provide a positive feel to the user. Red and green indicators provide
easy identification of Armed and Disarmed modes and the in-built sounder provides audible feedback via polyphonic like signalling tones during system operation. The sounder
emits a siren sound during alarm condition providing early warning and the volume level is individually programmable for each code pad connected to the system.
Prox Token
Present the Token at the Keypad and the system will arm or disarm, great to give out to neighbours and relatives, elimates the need for them to right down your code to your alarm panel .
• 1x Reflex Horn Speaker (Wired)
• 1x Siren Box Plastic white
• 1x Siren Tamper Switch
• 1x Flashing Blue Strobe Light (Wired)
• 1x Internal Piezo siren screamer. (Wired)
Warranty
3 Year Manufacturer Warranty
Freight/Postage Charge
Combined Postage - We will combine postage on all our products and you won't pay any additional postage for extra items if you order a kit from us
Cheap Local Delivery $15.00 Sydney Metro
Australia Wide $35.00
Experienced - We have over 40 years experience in the Security industry.
Note: Sydney Metropolitan only/ Penrith Area discounted installation
Call 1300 552 282
Additional Information
| Manufacturer | Bosch |
|---|



