Bosch Alarm Control Panel Solution 880 Ultima in Metal Box

Solution 880 Ultima Control Panel (CC488) Eight programmable user codes and eight radio remote user codes Two areas DTMF telephone remote arming Remote programming The CC488 Solution Ultima 880 Control Panel provides eight programmable hard-wired or wireless burglary zones. Remote programming provides added convenience and adaptability. Eight Programmable User Codes and Eight Radio Remote User Codes Users can program up to eight user codes and eight radio user codes. Only the Master Code holder can add or change other system user codes. Two Areas The control panel is partitioned into two areas. Operate both areas from one master codepad or from multiple separate area addressable codepads. Remote Programming Users can program the zones remotely with CC816 Alarm Link (A-Link) software on a PC with MS-DOS® and a modem. Users can run diagnostics, arm systems, and bypass zones with an off-site computer. This reduces service visits to a site and provides quick customer service, saving time and money. Remote programming is useful for country locations where a control panel might be located hundreds of kilometers (miles) from an office. Three Arming Modes Users can arm the system using one of three modes: AWAY Mode: Arms the entire system. STAY Mode 1: Arms most zones. Does not arm zones programmed as isolated (installer). STAY Mode 2: Arms most zones. Does not arm zones programmed as isolated (Master Code holder). Dual-tone Multi-frequency (DTMF) Telephone Remote Arming Users can arm the system from any remote location using a DTMF telephone. Once a communication link is established between a DTMF telephone and the system, users can operate the system using the telephone in the same way as a codepad. Day Alarm Day alarm monitors a group of zones when the system is disarmed. For example, the front door of a shop has a pressure mat or electronic beam that customers turn on as they enter or exit. The codepad beeps each time the mat or beam turns on. Duress Alarm A codepad duress alarm can work as a silent hold-up alarm and is useful when the system reports to a monitoring station or pocket pager.