Bosch Expansion board for Solution 16 Plus and 64 Control Panel (CM110)

Bosch Expansion board for Solution 16 Plus

Features
4 x Form C relay contacts
LAN monitored
Status LED
Service code pad connection
The CM110 output expansion module allows quick and easy
installation of addition physical outputs to the intrusion
control panel. It also provides the ability to add external
readers where available. Being LAN based the CM110 may
be co-located with the intrusion control panel or remotely
located.

Separate tamper input
The separate tamper input allows installation of the module
within its own secure enclosure without the need to utilise
valuable intrusion inputs to provide cabinet tamper.
Installation/Configuration Notes
The CM110 is supplied as a PCB module and can be
installed in the same cabinet as the main panel or remotely
from the panel via the 4 wire LAN connection. The CM110
requires only one module space in the enclosure. Each
module is given a separate module address selected via a
three way dip switch. 

Functions
Status LED
The module status LED flashes to indicate that the module
is functioning correctly and communicating with the
intrusion control panel. A steady LED indicates a
communications failure.
Service code pad connection
Allows the temporary addition of a code pad locally to the
module. This feature is especially useful for system
maintenance of sites where the module is located away
from the main control panel.
Technical Specifications
Power Requirements
Voltage 10.5 to 14 V D C
Current 30 m A standby, 200 m A MAX (all relays
and LEDs operated)
Outputs 4 x Form C Relay outputs – contacts
rated at 24 VDC at 2 A MAX
Cable LAN length 305m using 14 / 020 0.8 m m 2 (22 AWG) cable