PHILIO Z-Wave Smoke Sensor

In stock

The PHILIO Smoke Sensor is a battery operated Z-Wave Plus ionisation smoke detector. Smoke detection is signaled through siren and LED diode. Additionally, the smoke sensor signal can be sent via Z-Wave gateway to authorised user's smartphones or tablets. The PHILIO  Smoke Sensor is designed to be placed on a ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor). Beeping signal warns when the battery needs replacing.
The device has the Z-WaveTM 500 series chip onboard. It is a Z-Wave™ plus product, it supports the security, OTA... Those newest features of the Z-Wave™ technology.

  • Details
  • Reviews
  • Postage via Australia Post E-Parcel Track and Trace Signed Delivery

If a fire develops in your home, you can immediately know about it no matter where you are by installing the PHILIO Z-Wave Smoke Sensor. Compatible with any Vera controller, the Smoke Sensor provides both a loud audio alarm and a Z-Wave network alert when smoke is detected. The battery-powered sensor easily mounts to the ceiling with its integrated yet removable bracket. 
FEATURES: Sends system alerts through the Z-Wave network. Can trigger other networked Z-Wave devices. “Z-Wave Plus” certified for wide compatibility. Easy to install with integrated ceiling bracket. Higher output power enhances communication range (+5dBm output power as compared to -2.5dBm 300 series). Low power consumption. Automatic low battery reports. Over-the-air firmware upgrades.

Please note that this smoke sensor can be used only as an auxiliary detector. To fulfil Australian regulation you have to have installed in your dwelling other fully certified in Australia smoke sensors, as a primary smoke detectors. Our Z-Wave smoke sensor can be used only as an additional detector linked to your home automation system. 
This sensor comes with everything you need to install it into an existing Z-Wave network, including mounting screws, drywall anchors, and a CR123A battery for power.

Product details

  • Compatible with certified Z-Wave controllers in Australian version (921.42MHz) including: VeraEdge UI7 and Fibaro HC2 / Lite.
  • Extremely easy installation - simply install it in location prone to fire.
  • Powered with one CR123A battery (included).
  • Alarm is signaled by loud 85db sound and LED diode.
  • Support the security, OTA.
  • Manual test functionality.
  • NWI automated inclusion functionality
    RF protocol
    Z-Wave (binary sensor)
    Battery Type
    One battery CR123A
    Operation Range
    up to 30m indoor
    Radio frequency
    921.42 MHz (AU/NZ Z-Wave)
    Operation temperature
    -10oC ~ 40oC
    Application Indoor use only
    Size (Diameter)
    65 x 28 mm





Write Your Own Review
You're reviewing:PHILIO Z-Wave Smoke Sensor
Your Rating
  • Goods are sent via Australia Post registered post E Parcel, signed track and trace.
  • Postage is calculated on the weighted shipping of your item to your postcode destination, for alarm systems we take into account the packaging of the item.
  • No goods are dispatched on weekends or public holidays.
  • For companies in Sydney we utilise our local courier service Couriers Please.
  • Track and trace will be uploaded to your order on our E-Commerce system, please ensure your mobile and emails are entered as you will receive an automated tracking through Australia Post.
  • Please note, we do not guarantee that Express Post is always available for next day delivery as items sell out quickly and all parts may not be in for shipping that day.
  • Australia Post picks up from our office is at 2:30pm weekdays, orders placed after 2:30pm that day will not be in the post until the following day.
  • We delivery to PO Boxes and Parcel Lockers but ideally work addresses are more suitable for signed delivery.
  • We are not responsible for Australia Post transit times as they do vary depending upon your destination.
  • Please note some regions do not have an Express Post guarantee for next day delivery.
  • Please ensure all your address details are entered correctly into our system as they are auto generated into our E-parcel account.
  • If you require this parcel urgently please call our office on 1300 552 282 to ensure all items are in stock prior to purchasing.
  • Pick up is available at our Jamisontown showroom, Unit 25, 46-48 Abel St, Jamisontown NSW, 2750.
Compare Products
You have no items to compare.
Please wait...