Bosch Solution 6000 CC615PB Non-Dialler PCB & CP737B Wi-Fi Keypad

The Bosch CC615GWF package combines the Solution 6000 CC615PB non-dialler control board with a white CP737B 3.5-inch Wi-Fi smart-card keypad. It provides the two main electronic components required for a Solution 6000 upgrade or system build, while allowing compatible enclosures, power equipment and field devices to be selected separately.

Important: This package does not include a metal enclosure, backup battery, plug pack or power supply, detectors, sirens, cabling or installation accessories. It is not a complete alarm kit.

What’s Included

• 1 × Bosch Solution 6000 CC615PB non-dialler control panel PCB
• 1 × Bosch CP737B white 3.5-inch colour-screen Wi-Fi smart-card keypad

Not Included

• MW350 or MW730B metal enclosure
• Backup battery
• Plug pack or power supply
• Detectors, reed switches or other sensors
• Internal or external sirens
• Alarm cable and general installation accessories
• Wireless receiver or expansion modules
• Installation, programming or ongoing app subscription

If you need the enclosure supplied with the board and keypad, compare the Bosch Solution 6000 Basic Wi-Fi Upgrade Kit – Non Dialler.

What “Non Dialler” Means

The CC615PB does not include the onboard dialler interface or onboard Ethernet/IP module provided by other Solution 6000 communication configurations. The Wi-Fi connection in this package is provided by the CP737B keypad for supported MyAlarm and iFob services.

This board is not suitable where a direct onboard dialler interface is required for a conventional back-to-base monitoring setup. If Ethernet, cellular or monitored alarm communications are required, contact CTC before ordering so the correct panel and communication pathway can be confirmed.

CC615PB Solution 6000 Control Board

• 16 onboard alarm zones, expandable to 144 zones with compatible expansion hardware
• Up to 8 independently controlled areas
• Up to 256 PIN, token, key fob or biometric users when compatible equipment is installed
• Supports compatible wired devices and wireless devices when the required receiver or expansion modules are added
• No onboard dialler interface or onboard IP module

CP737B Wi-Fi Smart-Card Keypad

• 3.5-inch colour graphical display with LED backlight
• Built-in 802.11 b/g/n Wi-Fi connectivity
• Integrated 40-bit MIFARE smart-card reader
• Up to 4 lines of text with clear icons and prompts
• Dedicated ON, OFF and PART arming keys
• Adjustable volume, backlight and display contrast
• On-screen clock and temperature display

iFob App Setup and Subscription

The CP737B keypad can connect the system to a suitable Wi-Fi network for supported MyAlarm and iFob services. Installer programming and MyAlarm registration are required. iFob is a paid subscription service, and available remote controls and notifications depend on the selected plan, system programming and compatible connected equipment.

View available Bosch Solution 6000 iFob plans.

Firmware and Compatibility

The CP737B keypad requires compatible Solution 6000 software. Version 2.53.67 introduced support for the CP737B; older panels may not be suitable for the required firmware upgrade, particularly panels with serial numbers below the supported range. This package includes the CC615PB board and CP737B keypad together, but compatibility should still be confirmed before mixing either component with other existing Solution 6000 equipment.

A licensed security professional should select the correct enclosure and power equipment, inspect any existing devices, install the board and keypad, and complete system and app programming.

CTC offers alarm system upgrades and professional alarm installation in Sydney.

Why Buy from CTC Communications?

• Security industry experience since 1993
• Bosch Platinum Dealer and Certified Partner
• Australia-wide delivery
• Sydney installation and upgrade services
• Pre-sales assistance with panel, power and communication compatibility

Compare more Bosch Solution 6000 upgrade kits, or read our Bosch alarm system comparison.