Bosch Solution 6000 Basic Wi-Fi Upgrade Kit – Non Dialler

The Bosch Solution 6000 Basic Wi-Fi Upgrade Kit – Non Dialler combines the CC615PB non-dialler control board, CP737B 3.5-inch Wi-Fi smart-card keypad and MW350 metal enclosure. It provides a flexible foundation for a professionally installed Bosch Solution 6000 alarm system while allowing suitable existing field devices to be assessed for reuse.

Important: This basic kit does not include a backup battery, plug pack or power supply, detectors, sirens or alarm cable. These must already be available and compatible, or purchased separately.

What’s Included

• 1 × Bosch Solution 6000 CC615PB non-dialler control board
• 1 × Bosch CP737B 3.5-inch colour-screen Wi-Fi smart-card keypad
• 1 × Bosch MW350 empty metal enclosure, approximately 385 mm W × 260 mm H × 90 mm D
• Installation manual, user guide and end-of-line resistors
• Tampers for the external siren and control panel enclosure
• 3 × CTC Communications warning stickers
• One-month iFob app trial

Not Included

• Backup battery
• Plug pack or power supply
• Detectors, reed switches or other sensors
• Internal or external sirens
• Alarm cable and general installation accessories
• Installation, programming or ongoing app subscription

If you need the battery and power supply supplied with the upgrade hardware, see the Bosch Solution 6000 Wi-Fi Alarm Upgrade Kit.

What “Non Dialler” Means

The CC615PB is the non-dialler version of the Solution 6000 control board. It does not include an onboard telephone dialler or the communications connections provided on dialler-equipped board configurations. The CP737B keypad provides Wi-Fi connectivity for supported MyAlarm and iFob services when the system is correctly installed, programmed and registered.

If you require Ethernet, mobile network or monitored alarm communications, contact CTC before ordering so we can confirm the appropriate Solution 6000 hardware and service.

Solution 6000 System Capability

• 16 onboard alarm zones, expandable to 144 zones with compatible expansion hardware
• Up to 8 independently controlled areas
• Up to 256 users
• Supports compatible wired devices and wireless devices when the required receiver or expansion modules are installed
• Flexible programming for residential and commercial security applications

CP737B Wi-Fi Keypad

• 3.5-inch colour display with clear text prompts
• Built-in 802.11 b/g/n Wi-Fi
• Integrated 40-bit MIFARE smart-card reader
• Dedicated ON, OFF and PART arming keys
• Adjustable volume, backlight and display contrast
• On-screen clock and temperature display

iFob App Setup and Subscription

The included one-month iFob trial allows eligible customers to experience supported remote alarm controls through the MyAlarm service. Installer programming and MyAlarm registration are required. Ongoing access is subject to a paid subscription after the trial, and available functions depend on the selected plan, system programming and compatible connected equipment.

View available Bosch Solution 6000 iFob plans.

Compatibility and Installation

Existing detectors, sirens, cabling and power equipment can only be reused if they are compatible, correctly rated and in serviceable condition. A licensed security professional should inspect the existing system, install the kit, confirm power and battery requirements, and complete programming and app registration.

This kit includes the CC615PB board and CP737B keypad together. If you intend to use either component with a different or older Solution 6000 system, contact CTC first to confirm hardware and firmware compatibility.

CTC offers alarm system upgrades and professional alarm installation in Sydney.

Why Buy from CTC Communications?

• Security industry experience since 1993
• Bosch Platinum Dealer and Certified Partner
• Australia-wide delivery
• Sydney installation and upgrade services
• Pre-sales assistance with compatibility, communications and app options

Compare more Bosch Solution 6000 upgrade kits, or read our Bosch alarm system comparison.