Bosch Solution 6000 Basic Wi-Fi Upgrade Kit

The Bosch Solution 6000 Basic Wi-Fi Upgrade Kit combines the CC610PB dialler-equipped control board, CP737B 3.5-inch Wi-Fi smart-card keypad and MW350 metal enclosure. It provides app-ready core equipment for a professionally installed Solution 6000 upgrade while allowing suitable existing alarm devices to be assessed for reuse.

Important: This basic kit does not include a backup battery, plug pack or power supply, detectors, sirens or alarm cable. iFob smartphone app access requires installer programming, MyAlarm registration and an ongoing subscription after the included one-month trial.

What’s Included

• 1 × Bosch Solution 6000 CC610PB dialler-equipped control board
• 1 × Bosch CP737B 3.5-inch colour-screen Wi-Fi smart-card keypad
• 1 × Bosch MW350 empty metal enclosure, approximately 385 mm W × 260 mm H × 90 mm D
• Installation manual, user guide and end-of-line resistors
• Tampers for the external siren and control panel enclosure
• 3 × CTC Communications high-resolution alarm warning stickers
• One-month iFob app trial

Not Included

• Backup battery
• Plug pack or power supply
• Detectors, reed switches or other sensors
• Internal or external sirens
• Alarm cable and general installation accessories
• Installation, programming or ongoing app subscription

If you need the battery and power supply supplied with the upgrade hardware, see the Bosch Solution 6000 Wi-Fi Alarm Upgrade Kit. For a lower-cost no-onboard-dialler configuration, compare the Bosch Solution 6000 Basic Wi-Fi Upgrade Kit – Non Dialler.

CC610PB Solution 6000 Control Board

• 16 onboard alarm zones, expandable to 144 zones with compatible expansion hardware
• Up to 8 independently controlled areas
• Up to 256 PIN, token, key fob or biometric users when compatible equipment is installed
• Supports compatible wired devices and wireless devices when the required receiver or expansion modules are added
• Dialler-equipped board configuration for supported alarm communication options

CP737B Wi-Fi Smart-Card Keypad

• 3.5-inch colour graphical display with LED backlight
• Built-in 802.11 b/g/n Wi-Fi connectivity
• Integrated 40-bit MIFARE smart-card reader
• Up to 4 lines of text with clear icons and prompts
• Dedicated ON, OFF and PART arming keys
• Adjustable volume, backlight and display contrast
• On-screen clock and temperature display

iFob App Setup and Subscription

The CP737B keypad connects the system to a suitable Wi-Fi network for supported MyAlarm and iFob services. A security installer must program the system and complete MyAlarm registration. The included one-month iFob trial allows eligible customers to experience supported remote controls and notifications; ongoing use requires a paid subscription.

Available functions depend on the selected plan, system programming and compatible connected equipment. View available Bosch Solution 6000 iFob plans.

Compatibility and Installation

Existing detectors, sirens, cabling and power equipment can only be reused if they are compatible, correctly rated and in serviceable condition. A licensed security professional should inspect the existing system, install the kit, confirm power and battery requirements, and complete programming and app registration.

The CC610PB board and CP737B keypad are supplied together in this kit. If you intend to use the keypad with a different or older Solution 6000 panel, contact CTC first to confirm the required firmware and panel compatibility.

CTC offers alarm system upgrades and professional alarm installation in Sydney.

Why Buy from CTC Communications?

• Security industry experience since 1993
• Bosch Platinum Dealer and Certified Partner
• Australia-wide delivery
• Sydney installation and upgrade services
• Pre-sales assistance with compatibility, power and app requirements

Compare more Bosch Solution 6000 upgrade kits, or read our Bosch alarm system comparison.