Secor WP06 Slimline External Siren and LED Strobe

Complete Slimline Siren and LED Strobe

The Secor WP06 is a compact external siren-and-strobe combination for compatible hardwired security alarm systems. Its slimline UV-treated housing contains an adjustable siren, bright LED strobe, front and rear tamper protection and built-in end-of-line resistors.

Key Features

• Complete external siren and LED strobe assembly
• Sound output up to 110 dB at one metre
• Selectable low volume for testing and high volume for normal operation
• Two selectable siren tones: warble or high/low
• Independent siren and strobe operation
• Front and rear tamper protection
• Built-in end-of-line resistors
• UV-treated weatherproof plastic housing
• Compact 200 × 110 × 70 mm design

What Is Included

• 1 × Secor WP06 slimline external housing
• Built-in siren
• Built-in LED strobe
• Front and rear tamper mechanisms
• Built-in end-of-line resistors

An alarm control panel, cabling, backup battery, mounting consumables and installation are not listed as included.

Alarm System Compatibility

The WP06 is suitable for compatible hardwired alarm systems, including supported Bosch and Risco panels. Its 9–15 V DC operating range, current requirements, siren and strobe outputs, tamper circuit and end-of-line configuration must all be checked against the alarm panel before connection.

This is a wired alarm accessory and is not designed to operate as a standalone or wireless siren.

Independent Siren and Strobe Control

The siren and LED strobe can be operated independently when supported by the alarm panel and system programming. This allows the audible warning to reset while the strobe continues to indicate that an alarm event has occurred, depending on the installation configuration.

Selectable Sound Output

The WP06 provides two selectable tones: a warble tone and a high/low tone. The sound level can also be reduced during testing before being returned to the high-volume operating setting, with maximum output stated as 110 dB at one metre.

External Installation

The UV-treated housing is described as weatherproof for external installation. No specific IP rating is provided in the available specifications, so the mounting position, cable entry sealing and exposure to weather should be assessed by the installer.

Technical Specifications

• Brand: Secor
• Model: WP06
• Product type: Wired external siren and LED strobe
• Operating voltage: 9–15 V DC
• Sound pressure level: Up to 110 dB at 1 m
• Siren current: 150 mA
• Strobe current: 50 mA
• Tone 1: Warble
• Tone 2: High/low
• Dimensions: 200 × 110 × 70 mm
• Tamper protection: Front and rear

Professional Installation Recommended

Professional installation is recommended to verify the alarm panel outputs, total current load, end-of-line resistor values, tamper wiring and suitable external mounting. CTC Communications offers alarm installation across Sydney.

Why Buy from CTC Communications?

• Specialist advice for wired security alarm accessories
• Fast Australia-wide delivery
• Professional security alarm installation available across Sydney

Browse more Bosch-compatible alarm accessories.