Rosslare AC-Q41HB Standalone PIN Keypad

Rosslare AC-Q41HB Standalone PIN Controller

The Rosslare AC-Q41HB combines a 3 × 4 blue-backlit metal keypad and a standalone single-door controller in one anti-vandal unit. It stores up to 500 users and is programmed locally at the keypad, making it suitable for sites that need straightforward PIN access without a separate access-control server.

Key Features

• Standalone control for one door with up to 500 PIN users
• Four-to-eight-digit PIN codes
• Three operating modes: Normal, Bypass and Secure
• Normal, Secure and Master user levels
• Blue-backlit 3 × 4 metal keypad with two tri-colour status LEDs and sounder
• Timed lockout after three incorrect code attempts
• Optical back tamper and built-in heater for cold conditions
• IP54-rated metal housing for sheltered outdoor or indoor installation

Door Control and Inputs

• 2 A Form C lock relay with normally open and normally closed contacts
• Supports correctly configured fail-safe or fail-secure locking hardware
• 2 A Form C auxiliary relay with programmable functions
• Normally open request-to-exit input
• Normally open auxiliary input with ten programmable modes
• Door Ajar, Forced, Shunt, Monitor and Secure functions
• Optional doorbell operation through the keypad’s asterisk key when used with a compatible Rosslare BL-D40

Power and Professional Installation

The AC-Q41HB requires a regulated 12–24 V DC power supply or a 16–24 V AC transformer. At 12 V DC it draws approximately 70 mA in standby and 130 mA maximum with the heater off, or 550 mA in standby and 610 mA maximum with the heater operating.

The power supply must be sized for the keypad, electric lock and any connected accessories. The lock type, relay configuration and fire or emergency-release requirements must also be assessed for the door.

Because the controller and relays are located at the keypad, a higher-security door may require a split controller architecture that keeps the lock relay on the secure side. Professional low-voltage installation and commissioning are recommended.

What’s Included

• One Rosslare AC-Q41HB standalone PIN keypad controller
• Product documentation available from the Downloads section

What’s Not Included

• Power supply or transformer
• Electric strike, magnetic lock or other locking hardware
• Exit button, door contact, cabling or enclosure
• Rosslare BL-D40 doorbell accessory
• Access cards or fobs; this model is PIN only
• Installation, programming or commissioning

Specifications

Delivery and Installation

CTC Communications delivers the AC-Q41HB Australia wide. Browse compatible door locks and exit buttons, or view the wider Rosslare range.

For suitable Sydney projects, CTC can assist with professional access-control installation and commissioning. Request a quote with the door type, lock type and site location.